Get a Quote

Fire & Smoke Alarm Installation in East London — NICEIC Electricians

fire & smoke alarm and niceic certified

Battery alarms that get pulled out the moment they chirp are not protection — and if you are a landlord, they are not compliance either. Properly installed, mains-powered, interlinked smoke and heat alarms mean that when one goes off, they all go off, giving everyone time to get out. GFL Electrical are NICEIC-approved electricians installing smoke, heat, and carbon monoxide alarm systems across East London for homeowners and landlords, wired and certified to standard.

Our fire & smoke alarm service

  • Mains-powered (hardwired) smoke and heat alarms with sealed battery backup
  • Interlinked systems — hardwired or wireless — so one trigger sounds them all
  • Carbon monoxide (CO) alarms for rooms with gas boilers, wood burners, or open fires
  • Correct placement to BS 5839-6 — the right alarm type in the right location on every storey
  • Landlord compliance installs and upgrades to meet the Smoke and Carbon Monoxide Alarm Regulations
  • Testing and certification of the installation

Why it matters — and the rules

Since the Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022 (in force from 1 October 2022), rented homes in England must have:

  • At least one smoke alarm on every storey with a habitable room, and
  • A CO alarm in any room with a carbon-fuelled appliance (gas boiler, wood burner, open fire).

Landlords are responsible for repairing or replacing alarms once told of a fault, and non-compliance can mean fines of up to £5,000. Interlinking and mains-powered systems go beyond the bare minimum but are the gold standard for safety — and the most reliable way to keep tenants protected and yourself compliant.

Why choose GFL Electrical

  • NICEIC approved — installed and certified to UK standards.
  • Correct grade and placement — we install to BS 5839-6, with the right detector (optical, heat, multi-sensor) in the right place, not just an alarm slapped on a ceiling.
  • Interlinked done properly — hardwired or wireless, so the whole system responds together.
  • Landlord-ready paperwork — certification you can show tenants, agents, and your insurer.

How it works

  1. Tell us the property — number of storeys, appliances (gas, solid fuel), and whether it’s a rental.
  2. We design the system — alarm types and placement to meet the regulations and BS 5839-6.
  3. We install and interlink — mains-powered with battery backup, hardwired or wireless interlink.
  4. We test and certify — and show you how it works.

What it costs

Cost depends on the number of alarms, the property size, and whether they are hardwired or wireless-interlinked. A small flat needs fewer units than a three-storey house, and hardwiring costs more than wireless-interlinked but is the most robust. We will give you a clear quote based on your property before starting.

Areas we cover

We install smoke and CO alarms across East London — Leyton, Walthamstow, Leytonstone, and the surrounding boroughs including Hackney, Newham, Tower Hamlets, and Redbridge. See our areas page or ask when you get in touch.

Fire and smoke alarm installation near you:

Frequently asked questions

What are the smoke alarm rules for landlords? Rented homes in England need at least one smoke alarm on every storey with a habitable room, plus a CO alarm in any room with a carbon-fuelled appliance. Landlords must repair or replace faulty alarms once notified, with fines up to £5,000 for non-compliance.

Do smoke alarms have to be mains-powered? The regulations require working alarms; mains-powered (hardwired) alarms with battery backup are the most reliable and the standard we recommend, as tenants cannot simply remove the battery.

What does interlinked mean? Interlinked alarms — hardwired or wireless — all sound together when any one is triggered, so you are warned wherever you are in the property. It is the gold standard for early warning.

Do I need a carbon monoxide alarm? Yes if you have a carbon-fuelled appliance (gas boiler, wood burner, open fire) in a room — a CO alarm is required there for rented homes and strongly advised for any home.

Where should alarms go? We install to BS 5839-6 — the correct alarm type and location on each storey, including heat alarms in kitchens. We design the layout for your specific property.

Will I get a certificate? Yes — we test and certify the installation, giving you paperwork you can show tenants, agents, and insurers.

Book your alarm installation

Tell us your property — how many storeys, what appliances, and whether it’s a rental — and we will design a compliant, interlinked system and give you a clear price. NICEIC-approved and certified.

Get in touch or request a quote and we will get back to you.

Call Now Button